SuperB chain cleaner

The rack brush, to obtain the best performance, it is advisable to use the chain cleaner with rack brushes, cleaning brushes and chain degreaser during the chain cleaning process.

• Cover the work area with newspapers or rags to absorb excess cleaning fluid and dirt from the chain during cleaning.
• Mount the bicycle on a tripod to make sure that the waist can turn freely.
• Move the chain over the small freewheel and adjust the bike so that the lower part of the chain is parallel to the ground.
• Spread the mud, dirt and excess dirt from the chain and freely rotate the rack brush and cleaning brush.
• Assemble the handle on the body of the chain cleaner.
• Push the locking clip to remove the cover upward, place the chain cleaner on the bottom of the chain, halfway between the gear set and the set of gaskets.
• Replace the cover and then turn the locking clip into place. You should hear an audible "CLIC" to indicate that the lock clip is protected.
• Add the degreaser to the "FILL" line on the side of the lower case. Do not overfill to prevent leakage.
• Hold the handle of the chain cleaner firmly with one hand, turn the crank / pedal slowly overclock multiple complete rotations until the entire chain has passed through 2 or 3 cycles. Fill the tank with new cleaning liquid and repeat the procedure if necessary.
• Remove chain cleaning and dry the chain. Re-lubricate the chain.
• Wash the chain cleaner with water and dry in the shade before storing it.