CO2 Regulator Peaty's Holeshot Head - Grey

CO2 Regulator Peaty's Holeshot Head, made from CNC machined 6061 aluminum, and with a patented valve design, the details of Peaty's inflator heads have been meticulously crafted, from the precise rubber blend of the sealing rings to the fantastic anodized Chris King colors. The compact straight design allows for faster airflow for quick inflation and creates less stress on your tubeless valves when in use, as you are approaching the valve directly rather than at a 90-degree angle.

• Unique, compact, straight design for maximum airflow.
• Just press down to inflate - Release to stop.
• Made from 6061 aluminum.
• Available in 12 Chris King colors.
• Compatible with Presta valves.

Instructions.

• Remove the valve cap and loosen the valve core.
• Check that the valve is free by pressing the loosened valve core.
• You should hear air flowing through the valve.
• Cover the CO2 cartridge with the anti-freeze protective sleeve.
• Screw the CO2 cartridge fully into the regulator head.
• You may hear a small hiss when the cartridge is successfully punctured.
• If not, briefly press on the valve and you should hear gas escaping with a hiss.
• Press the head onto the valve and push down firmly to release the cartridge and inflate the tire to the desired pressure.
• Releasing the regulator head will stop the flow.
• Once the tire is inflated, remove the regulator, tighten the valve core again, and reapply the valve cap.
• Pedal.