Peaty's Holeshot Tubeless Repair Kit for Handlebar - Brown

Peaty's Holeshot tubeless repair kit for handlebars, when using tubeless, you need to be prepared for any eventuality. There are some punctures that you cannot repair with sealant: the classic is a pinch flat or “snake bite,” where the soft tire is pinched between the hard edge of the rim and a much harder rock. If you are lucky enough not to damage the rim, it is very likely that you will end up with two holes in the tire, one above and one right next to the tire bead. Holes near the tire bead are the enemy of sealant, as the centrifugal forces created by a moving wheel throw the sealant outward, on top of the tire, pulling it away from the bead. To make matters worse, during turns the tire bead flexes reopening the hole, so even if the sealant temporarily repairs it, it is likely to reopen with the forces of the turns. Without a tire string, a tire with a pinch flat would end up with an inner tube inside or, worse, would be destined for the trash!

• Each kit includes a sheet of 3 mm strings and one of 1.5 mm that are stored wrapped around the fork, neatly hidden inside the tool pod.
• The quickest and easiest way to repair punctures that the sealant cannot seal.
• Unique single-sided fork design: just push and slide the string into the fork's cavity.
• Leave the string in place with every use, without pulling it out of the tire.
• The fork is sharp and as thin as possible so as not to widen the existing hole, unlike most traditional products on the market.
• Grooved body and ribbed cover/handle for extra grip.
• Weatherproof sealing rings make the tool waterproof when assembled.
• 316 stainless steel fork.
• 6061 anodized aluminum body.
• Available in 12 Chris King colors.
• Color: Brown (Bronz).